Why the tubing matters in a closed system
The silicone tubing on your Ameda HygieniKit connects the pump to the milk collection system. Because HygieniKit is a closed system, milk does not enter the tubing during pumping. That design means you spend less time worrying about cleaning the inside of the tube and more time focused on the quality of milk you're giving your baby.
Even in a closed system, tubing is a wear item. It flexes every time you pump, and over time it can loosen at the connections or develop small cracks. Replacing it is a simple maintenance step that helps keep your setup running smoothly.
When to replace your HygieniKit tubing
There is no single replacement schedule that fits every pumping routine. Instead, watch for signs that the tubing is no longer doing its job. Replace the tubing if you notice moisture inside the tube, visible cracks or tears, or a loose fit where the tubing connects to the pump or collection kit. If suction seems weaker and you've already checked other parts, worn tubing is one possible cause.
Because milk should not enter the tubing in a closed system, moisture inside the tube is unusual and worth addressing. If you see condensation or droplets that don't clear after air-drying, swap in a new tube rather than continuing to use the old one.
How to change Ameda pump tubing
Replacing the tubing takes only a minute. Work with clean hands and a dry pump and collection kit.
- Disconnect the old tubing: Gently pull the tubing away from the pump and from the HygieniKit collection system. Do not pull by the tube itself if you can grip the connector instead.
- Inspect the new tubing: Check that the replacement tube is clean, dry, and free of kinks before installing it.
- Attach the new tubing: Push the tubing firmly onto the pump outlet and the collection kit connection. Give a light tug to confirm it is seated.
- Test your suction: Run the pump briefly to confirm the tubing is connected securely and suction feels normal before your next session.
Caring for HygieniKit tubing between replacements
Keep the tubing dry and store it loosely coiled rather than tightly bent. Avoid stretching the tube when you disconnect it, and check the ends periodically for small splits. Since milk does not enter the tubing in the closed system, you do not need to clean the inside of the tube as part of normal use. If moisture does appear, replace the tubing rather than trying to dry it out.
The replacement part at a glance
- Ameda HygieniKit® Silicone Replacement Tubing, 2 Count: Ameda HygieniKit Silicone Replacement Tubing comes in a 2 count pack and is compatible with the HygieniKit Milk Collection System. A two-pack gives you a spare tube on hand so you can replace a worn or damp tube without interrupting your pumping routine.

Ameda HygieniKit® Silicone Replacement Tubing, 2 Count - Ameda HygieniKit® Silicone Replacement Tubing, 2 Count: This tubing is only compatible with HygieniKit breast pumps, not with the Mya Milk Collection System, Mya pump, or Mya Pro pump. Check your pump model before ordering so you get the right tubing for your setup.
A note on compatibility
The HygieniKit silicone tubing is designed specifically for HygieniKit breast pumps. It is not compatible with the Mya Milk Collection System, Mya pump, or Mya Pro pump. If you use a Mya-series pump, refer to the parts designed for that system instead. When in doubt, match the replacement part to the pump you actually use.


